- Roof handrail
- Eave catwalk
- Eave handrail
- Foam eave close
- Metallic eave skirt
- Anti-avalanche
- Trapezoidal roof inspection door
- Semiautomatic gate
- Neumatic charge filling
- Grain stopper system
- Side discharge system
- Inner flat lining
- Anchorage system
- Closing angle
- Double bodysheet access door
- Slide gate for hopper silos outlet
- Wall support
- Double wall support with
overhang - Catwalks
- Column and supports
- Conveyour supports
- Roof supports
- Structure for delivery silo
- Platform between silos
- Maintenance platform
- Elevator tower
- Ladder to roof
- Ladder to roof
- Ladder to access door in cylinder
- Ladder to access door in cylinder
- Inside ladder
- Roof stairway
- Spiral stairway
- Zigzag stairway
- Rest platform
- Temperature monitoring system
- Level sensors
- Venting system
- Sweep augers
- Erection tools
- Aeration gutters system
- Full perforated floor
- Inside perforated cone
- Roof vent
- Fans
- Extractor fans
- Prefabricated gutters
- Hopper aeration system
- Silo lining
- Pre-lacquered roof
- Paint polyester powder
- Ladder to roof
- Neumatic filling
- Roof vent
- Access ladder
- Roof inspection door
- Manhole door
- Level viewer
- Weighing kit
- Bolting protection
- Auxiliary nozzle on hopper
- Auxiliary galvanised nozzle
- Slide gate
- Level sensor
- Galvanised roof
- Painted roof
- Floating covering
- Anti-algae mesh
- Hexagonal tiles
- Inner lining
- Roof vent
- Roof inspection door
- Inlet and outlet connections
- Overflows
- Epoxi covering
- Filling pipe
- Access ladder
- Inside ladder
- Rest platform
- PVC Cone
- Double metal cone
- Metal 125mm boot cone
- Universal adapter collar
- Boots
- Flex auger
- Tubes and elbows
- Control unit Uniflex
- Control unit Inox
- Stop sensors
- Capacitive stop sensor
- Geared motor
- Control panel
- Oulet drops
- Starter and intermediate hopper
- Dispenser
- PVC Cone
- Metal cone
- Load unit
- Chain
- Tubes and clamp
- Corners
- Drive unit
- Control panel
- Outlet drop
- Dispenser
FLAT BOTTOM SILO
MASS DISCHARGE SILO
HOPPER SILO
NO RING
NO RING
HOPPER SILO
INDOOR SILO
FEED SILO
DELIVERY SILO
WATER TANK
WATER TANK
FLEX AUGER FEED
DELIVERY SYSTEM
DELIVERY SYSTEM
CHAIN FEED
DELIVERY SYSTEM
DELIVERY SYSTEM
Roof handrail
Ensuring the transit from roof inlet until the inspection door.
Technical data sheet
Eave catwalk
Perimetral catwalk around eave, allowing the path around the eave.Option: exterior and interior.
Technical data sheet
Eave handrail
Perimeter handrail that increases operator safety.
Technical data sheet
Foam eave close
Increases the sealing of the silo.
Technical data sheet
Metallic eave skirt
Avoiding water and snow entrance.
Technical data sheet
Anti-avalanche
Galvanised rail on the roof avoiding snow avalanches.
Technical data sheet
Trapezoidal roof inspection door
Roof hole allowing the entrance to silo from the roof.
Technical data sheet
Semiautomatic gate
Allow opening from the ground.
Technical data sheet
Neumatic charge filling
Channel system with charge and decompression pipe to fill the silos with air pressure.
Technical data sheet
Grain stopper system
Load system to avoid grain damage and breakage with deflector plates, as well grain disaggregation by weight or dust creation, thus minimizing explosion hazard.
Technical data sheet
Side discharge system
Lateral discharge system composed by buckets to empty the silo down to 70% of the capacity without energy spending or maintenance. Unloading could be performed to truck, train or conveyor.
Technical data sheet
Inner flat lining
Improves the flowing of the material and the cleanliness of the silo.
Technical data sheet
Anchorage system
We provide standard or metalic, chemical and expansive anchor bolts.
Technical data sheet
Closing angle
Perimetral closing for silo with non-elevated inner slab.
Technical data sheet
Double bodysheet access door
Double door for easier access into the silo. Place in the first and second rings. The inner door is divided into 3 sections to avoid grain leak.
Technical data sheet
Slide gate for hopper silos outlet
Different actuation: manual, electric, pneumatic and double actuation.
Technical data sheet
Wall support
Technical data sheet
Double wall support with overhang
Technical data sheet
Catwalks
Catwalks are modular, consequently adjustable to each project. Design is made according to UNE EN ISO 14122. Closed catwalk is available.
Technical data sheet
Column and supports
We design supports according to the plant and to UNE EN ISO 1993 norm.
Technical data sheet
Conveyour supports
Hot dip galvanised conveyor supports, with adjustable height.
Technical data sheet
Roof supports
Galvanised supports on silo dome for conveyor.
Technical data sheet
Structure for delivery silo
Support structure for delivery silo with free total height of 5 meters for truck or train transit.
Technical data sheet
Platform between silos
Provides access to the inspection door.
Technical data sheet
Maintenance platform
Modular metallic structures of 700, 900 or 1100mm wide to ease the maintenance.
Technical data sheet
Elevator tower
Easy-access elevator tower.
Technical data sheet
Ladder to roof
To get the roof of the silo by climbing up the cylinder wall.With a safety cage and intermediate rest platforms, according to the UNE EN ISO 14222-1/2/3/4:2002.
Technical data sheet
Ladder to access door in cylinder
Includes a support platform for handling the door and closing.
Technical data sheet
Inside ladder
It runs from the access door in the slope to the ground.
Technical data sheet
Roof stairway
Step-stair from the eave to the centre collar.
Technical data sheet
Spiral stairway
Distributed spirally around the silo.
Technical data sheet
Zigzag stairway
We provide access to the top of the silo, to an elevator tower or to a work tower.
Technical data sheet
Rest platform
Platforms are included in each ladder to roof section.
Technical data sheet
Temperature monitoring system
It allows the control of the temperatura and humidity. ATEX certified.
Technical data sheet
Level sensors
Indicate maximum or minimum fill level. Types: rotatite, pendular, capacitive or membrane type
Technical data sheet
Venting system
System based on polyamide bolt-nut according to EN 14491 2012 norm and anti-explosions ATEX norm.
Technical data sheet
Sweep augers
It is used to empty completely the flat bottom silo. ATEX certification.
Technical data sheet
Erection tools
Complete set of tools for silo mounting.
Technical data sheet
Aeration gutters system
Channels and structures with ‘Y’, ‘H’, ‘C’ and ‘T’ arrangements depending on the type of silo.
Technical data sheet
Full perforated floor
Perforated floor is supported by supports that creating an air chamber for improved aeration.
Technical data sheet
Inside perforated cone
Elevated cone made of galvanised steel inside the silo. The system avoids contact between the ground and grain, making civil works cheaper.
Technical data sheet
Roof vent
Circular nozzle to maintain constant air flow.
Technical data sheet
Fans
Air fan, or exhaust fan. IE2 certification, ensuring energy efficiency.
Technical data sheet
Extractor fans
Helicoidal fan on the roof as part of an aeration roof vent.
Technical data sheet
Prefabricated gutters
Located in the silo foundation. Available for ‘Y’, ‘H’ and ‘C’ type aeration systems.
Technical data sheet
Hopper aeration system
Aeration cannel fixed to a hopper sector for conexión with the fan.
Technical data sheet
Silo lining
Extra protection against corrosion and provides extra insulation. It is available for roof, cylinder and hopper, in different colours.
Technical data sheet
Pre-lacquered roof
Sector are galvanised Steel with S280GD + Z225 GS 25/7µm of polyester.
Technical data sheet
Paint polyester powder
Coating with polyester resins which increases corrosion resistance.
Technical data sheet
Neumatic filling
Neumatic charge filling. Channel system with charge and decompression pipe to fill the silos with air pressure.
Technical data sheet
Roof vent
For aeration of the silo, preventing condensation.
Technical data sheet
Access ladder
Vertical ladder from the ground level to roof, with safety cage according to the standard UNE-EN ISO 14222 – 1/2/3/4.
Technical data sheet
Roof inspection door
Installed on the roof to carry out inspections inside the silo.
Technical data sheet
Manhole door
Access to the interior for cleaning and inspection.
Technical data sheet
Level viewer
Quick overview of the feed level in the silo.
Technical data sheet
Weighing kit
System that calculates the weight externally, without contact with the product.
Technical data sheet
Bolting protection
Plastic capsule-hood that is fixed to the bolting to prevent corrosion.
Technical data sheet
Auxiliary nozzle on hopper
To unload the feed from the side of the silo.
Technical data sheet
Auxiliary galvanised nozzle
Allows manual unloading of the feed from the silo to the bag or the trolley.
Technical data sheet
Slide gate
Gates that are located at the outlet of the hopper silos.
Technical data sheet
Level sensor
They indicate the maximum or minimum fill level. Types: membrane, pendulum and rotary.
Technical data sheet
Galvanised roof
The roof is made up of trapezoidal sectors.
Technical data sheet
Painted roof
Coated with an 80 μm layer of epoxy powder coating on galvanised sheet metal ZM 310.
Technical data sheet
Floating covering
Protects from sunlight, preventing algae and falling objects.
Technical data sheet
Anti-algae mesh
Protects from sunlight and prevents algae.
Technical data sheet
Hexagonal tiles
Protects from sunlight and prevents algae.
Technical data sheet
Inner lining
Additional corrosion protection.
Technical data sheet
Roof vent
Circular nozzle to maintain constant air flow.
Technical data sheet
Roof inspection door
To carry out interior inspections.
Technical data sheet
Inlet and outlet connections
Technical data sheet
Overflows
Technical data sheet
Epoxi covering
80 μm epoxy powder coating on galvanised sheet metal.
Technical data sheet
Filling pipe
Technical data sheet
Access ladders with protection
To get to the roof of the silo by climbing up the cylinder wall. With a safety cage and intermediate rest platforms, according to the UNE EN ISO 14222-1/2/3/4:2002.
Technical data sheet
Inside ladder
Allows climbing up the inside wall of the cylinder.
Technical data sheet
Rest platform
Platforms are included in each ladder to roof section.
Technical data sheet
Ladder to roof
To get the roof of the silo by climbing up the cylinder wall. With a safety cage and intermediate rest platforms, according to the UNE EN ISO 14222-1/2/3/4:2002.
Technical data sheet
Ladder to access door in cylinder
Includes a support platform for handling the door and closing.
Technical data sheet
PVC Cone
15º. Made of plastic.
Technical data sheet
Double metal cone
Made of galvanised steel.
Technical data sheet
Metal 125mm boot cone
Adaptation for the 125mm boot.
Technical data sheet
Universal adapter collar
Made of galvanised steel.
Technical data sheet
Boots
Manufactured in stainless steel with discharge angles of 0º or 30º.
Technical data sheet
Flex auger
Economical and efficient solution for conveying granular or ground products.
Technical data sheet
Tubes and elbows
Made of White PVC. Diameters 56, 75, 90, 125 and 127 mm.
Technical data sheet
Control unit Uniflex
With safety sensor of membrane and mecanic. Diameters 75 and 90 mm.Transparent register with safety lock.
Technical data sheet
Control unit Inox
With mecanic safety sensor. Diameters 55, 75, 90 y 125 mm.
Technical data sheet
Stop sensors
We have 2 types: mechanical and membrane.
Technical data sheet
Capacitive stop sensor
Electronically controlled switch, fully sealed.
Technical data sheet
Geared motor
Power: 0.5, 1 and 1.5 CV. Types: Single phase (110-220 V) and Triphasic (230/400 V).Technical data sheet
Control panel
Power: 0.5, 1 and 1.5 CV. Types: Monophases and triphasics.
Technical data sheet
Outlet drops
Different mounting option and models Ø 55, 60, Ø 75, 90 and 125 mm.
Technical data sheet
Starter and intermediate hopper
Modular starter and intermediate hopper with lid. Diameters 55, 75, 90 y 125 mm
Technical data sheet
Dispenser
Transparent for tube of Ø 60 and Ø 70mm. Capacity 6L.
Technical data sheet
PVC Cone
15º. Made of plastic.
Technical data sheet
Metal cone
Made of galvanised steel.
Technical data sheet
Load unit
It can be installed outside the building or inside the building. Carrying capacity is gradually adjusted with a locking mechanism.
Technical data sheet
Chain
Made of galvanized steel with disc injected directly on the chain.
Technical data sheet
Tubes and clamp
Made of galvanised steel.
Technical data sheet
Corners
Made of polypropylene.
Technical data sheet
Drive unit
Made of stainless steel with fibreglass-reinforced polyamide wheels.
Technical data sheet
Control panel
Power: 0.5, 1 and 1.5 CV. Monophase and triphasics.
Technical data sheet
Outlet drop
Ø 60 for outlet tube of Ø 63 mm.
Technical data sheet
Dispenser
Transparent for tube of Ø 60 and Ø 70mm. Capacity 6L.
Technical data sheet
Ladder to roof
To get the roof of the silo by climbing up the cylinder wall. With a safety cage and intermediate rest platforms, according to the UNE EN ISO 14222-1/2/3/4:2002.
Technical data sheet