NEWS
Search
Close this search box.

FARM SILO

Our farm silo for efficient feed storage in livestock facilities is optimised according to EUROCODIGO.

Our technicians adapt the design and capacity of the silo and the feed distribution system to the required demand.

FARM SILO

Byelorussia

FARM SILO

Bulgaria

FARM SILO

Bhutan

FARM SILO

Chile

FARM SILO

Colombia

FARM SILO

Spain

FARM SILO

Estonia

Previous slide
Next slide

Diameters

1.8 I 2.10 I 2.55
2.75 I 3.2 I 3.8m

Capacities

From 5 m³
up to 72 m³

Guaranteed steel

S350 GD with Z600g/m² coating

Structural calculation

Eurocode EUROCODE EN - 1991-4 or any required standard.

STANDARD COMPONENTS

ROOFS//

Flexibility and maximum strength

TRAPEZOIDAL SECTOR:

sector-de-techo-silos-granja-symaga
Material

Steel

S350GD EN 10346:2015
Galvanisation
Z600. according to EN 10346:2015
Breaking load
360 N/mm2
Yield strength
280 N/mm2
Thickness
e= 1 mm
Design and technical features

Optimum strength due to the lower ribbing and reinforced connection.
Precision manufacturing facilitates installation.
Roofpitch 30º.

Technical sheet >

LOADING MOUTH:

boca-carga-silos-granja-symaga
Material
Steel
DC04 according to EN 10039
Galvanisation
HDG according to EN ISO 1461:2023
Thickness
e= 3 mm
Design and technical features

Pressure seal in pneumatic loading silos, to prevent dust from escaping.

Technical data >

SEMI-AUTOMATIC COVER:

tapa-semiautomatica-silos-granja-symaga
Material
Steel
S280 GD acc. to EN UNE-EN 10346:2015
Galvanisation
Z600 according to EN 10346:2015
Thickness
e= 2 mm
Design and technical features

Lid with a locking and opening system with manual operation from the ground./p>

Technical data >

CYLINDER//

Durability and reduced assembly time

VIROLAS:

virolas-silo-symaga
Material
Steel
S350GD EN 10346:2015
Galvanisation
Z600 EN 10346:2015
Breaking load
510 N/mm2
Límite elástico
450 N/mm2
Thickness
e= 0.8 to 1 mm
Design and technical features

Corrugation: 76×14 mm
Usable height: 1440 mm

Technical sheet >

HOPPER//

Material
Sectors
Steel
S350GD UNE-EN 10346:2015
Galvanisation
Z600 UNE-EN 10346:2015
Breaking load
510 N/mm2
Límite elástico
450 N/mm2
Thicknesses
e= 1 to 2 mm
Design and technical features

Sectors designed with shaped edge for a tight fit with the outlet.

Fixing of the upper part of the hopper sector to the cylinder, in the non-curved part of the wave, avoiding deformation caused by the pressure of the screw, preventing corrosion.

Inclination of 45º, 60º and 67º.

Technical sheet >

LOWER STRUCTURE//

Material
Paws
Steel
Galvanised S350GD UNE-EN 10346:2015
Galvanisation
Z600 UNE-EN 10346:2015
Bracing
Steel
280GD UNE-EN 10346:2015
Galvanisation
Z600 UNE-EN 10346:2015
Discharge port
Steel
S280 GD according to EN 10346:2015
Galvanisation
Z600 according to EN 10346:2015
Thicknesses
e= 3mm
Design and technical features

Omega profile legs.

Bracing formed by cold-formed ‘U’ pillars.

Anchor plates at the bottom.

The design of the leg and anchorage in a single piece facilitates the transmission of loads, providing greater resistance.

Discharge mouth: diameter of 445 mm at a height of 900 mm./p>

Technical sheet >

OTHER STANDARD COMPONENTS//

COATING:
Zinc Nickel ZiNi according to UNE-EN ISO 4017-4030-7089.
High precision in the coating of the part to facilitate assembly and more resistant to abrasion and corrosion.

DESIGN AND CHARACTERISTICS:

Hexagonal and round head M8-M10 screws.
Quality: Screw 8.8/p>

Technical sheet >

Supplied with double cord to ensure optimum sealing.

Technical data >

ACCESORIES

Need more information about our storage solutions?

RESOURCES
CUSTOMER AREA
FACTORY
COMMERCIAL AND TECHNICAL OFFICE

© 2024 Symaga. All rights reserved.