FEED SILO
Our feed silo for efficient feed storage in livestock facilities is optimised according to EUROCODIGO.
Our technicians adapt the design and capacity of the silo and the feed distribution system to the required demand.
Diameters
1.8 I 2.10 I 2.55
2.75 I 3.2 I 3.8m
Capacities
From 5 m³
up to 72 m³
Guaranteed steel
S350 GD with Z600g/m² coating
Structural calculation
Eurocode EUROCODE EN - 1991-4 or any required standard.
STANDARD COMPONENTS
ROOFS//
Flexibility and maximum strength
TRAPEZOIDAL SECTOR:
| Material | |
|---|---|
|
Steel |
S350GD EN 10346:2015 |
|
Galvanisation |
Z600. according to EN 10346:2015 |
|
Breaking load |
360 N/mm2 |
|
Yield strength |
280 N/mm2 |
|
Thickness |
e= 1 mm |
Design and technical features
Optimum strength due to the lower ribbing and reinforced connection.
Precision manufacturing facilitates installation.
Roofpitch 30º.
LOADING COLLAR:
| Material | |
|---|---|
|
Steel |
DC04 according to EN 10039 |
|
Galvanisation |
HDG according to EN ISO 1461:2023 |
|
Thickness |
e= 3 mm |
Design and technical features
Pressure seal in pneumatic loading silos, to prevent dust from escaping.
SEMI-AUTOMATIC COVER:
| Material | |
|---|---|
|
Steel |
S280 GD acc. to EN UNE-EN 10346:2015 |
|
Galvanisation |
Z600 according to EN 10346:2015 |
|
Thickness |
e= 2 mm |
Design and technical features
Lid with a locking and opening system with manual operation from the ground./p>
CYLINDER//
Durability and reduced assembly time
VIROLAS:
| Material | |
|---|---|
|
Steel |
S350GD EN 10346:2015 |
|
Galvanisation |
Z600 EN 10346:2015 |
|
Breaking load |
510 N/mm2 |
|
Yield strength |
450 N/mm2 |
|
Thickness |
e= 0.8 to 1 mm |
Design and technical features
Corrugation: 76×14 mm
Usable height: 1440 mm
HOPPER//
| Material | |
|---|---|
|
Sectors |
|
|
Steel |
S350GD UNE-EN 10346:2015 |
|
Galvanisation |
Z600 UNE-EN 10346:2015 |
|
Breaking load |
510 N/mm2 |
|
Yield strength |
450 N/mm2 |
|
Thicknesses |
e= 1 to 2 mm |
Design and technical features
Sectors designed with shaped edge for a tight fit with the outlet.
Fixing of the upper part of the hopper sector to the cylinder, in the non-curved part of the wave, avoiding deformation caused by the pressure of the screw, preventing corrosion.
Inclination of 45º, 60º and 67º.
LOWER STRUCTURE//
| Material | |
|---|---|
|
Paws |
|
|
Steel |
Galvanised S350GD UNE-EN 10346:2015 |
|
Galvanisation |
Z600 UNE-EN 10346:2015 |
|
Bracing |
|
|
Steel |
280GD UNE-EN 10346:2015 |
|
Galvanisation |
Z600 UNE-EN 10346:2015 |
|
Discharge port |
|
|
Steel |
S280 GD according to EN 10346:2015 |
|
Galvanisation |
Z600 according to EN 10346:2015 |
|
Thicknesses |
e= 3mm |
Design and technical features
Omega profile legs.
Bracing formed by cold-formed ‘U’ pillars.
Anchor plates at the bottom.
The design of the leg and anchorage in a single piece facilitates the transmission of loads, providing greater resistance.
Discharge mouth: diameter of 445 mm at a height of 900 mm./p>
OTHER STANDARD COMPONENTS//
COATING:
Zinc Nickel ZiNi according to UNE-EN ISO 4017-4030-7089.
High precision in the coating of the part to facilitate assembly and more resistant to abrasion and corrosion.
DESIGN AND CHARACTERISTICS:
Hexagonal and round head M8-M10 bolting.
Quality: Screw 8.8/p>
Supplied with double cord to ensure optimum sealing.