FLEX AUGER FEED DELIVERY SYSTEM
Economical and efficient solution for the transport of grainy granular or mashing mashed products for livestock or industrial sector where it is not necessary a big flow of production per hour and day.
COMPONENTS
SILO CONNECTIONS//
CONE 15º:
| Material | |
|---|---|
|
Polypropylene |
|
Technical Specification >
DOBLE METAL CONE:
| Material | |
|---|---|
|
Steel |
S275JR according to EN 10025-2:2020 |
|
Galvanization |
HDG according to EN ISO 1461:2023 |
Technical Specification >
METAL CONE BOX 125 MM:
| Material | |
|---|---|
|
Cone |
|
|
Steel |
S275JR according to EN 10025-2:2020 |
|
Galvanization |
HDG according to EN ISO 1461:2023 |
|
Slicer |
|
|
Steel |
Stainless Steel AS304 according to UNE-EN 10088-2:2015 |
Technical Specification >
LOADING COLLAR:
| Material | |
|---|---|
|
Steel |
DC04 according to EN 10039 |
|
Galvanisation |
HDG according to EN ISO 1461:2023 |
Technical Specification >
BOOTS//
| Material | |
|---|---|
|
Steel |
Stainless Steel AS304 according to UNE-EN 10088-2:2015 |
Design and Technical specification
Options: 1 to 4 exits.
Discharge angle of 0º or 30º.
For tubes of 55, 75, 90 and 125 mm diameter.
Stainless steel gate slide gate.
Side hatch for inspection or cleaning.
Combined with single or double cones.
Vibration ball.
Technical Specification >
FLEXIBLE AUGER//
| Material |
|---|
|
Tempered Steel Plate |
Design and Technical specification
For use in straight or curved sections.
Transport capicity from 400 kg/h to 4000 kg/h.
Models with outside diameters from Ø 34 to 96mm
Standard Coil 100m. On request different lengths availables.
Technical Specification >
TUBES AND ELBOWS//
| Material |
|---|
|
White PVC |
Design and Technical specification
Diameters 56, 75, 90, 125 y 127 mm.
Elbows of 45º.
Technical Specification >
CONTROL UNIT//
UNIFLEX:
| Material |
|---|
|
Polyamide 6 natural with 15% glass fibre |
Design and Technical specification
Stop sensor of membrane and mechanical.
Diameters 75 and 90 mm.
Transparent register with safety lock.
Union of pieces by tabs.
Inner edge to prevent water ingress.
Funnel with two slopes that facilitate the feed flow.
Complements:
Transparent flexible tube.
Connection to flexible tube by thread.
Technical Specification >
INOX:
| Material |
|---|
|
Stainless steel AS304 according to UNE-EN 10088-2:2015 |
Design and Technical specification
Mechanical stop sensor.
Diameters 55, 75, 90 and 125 mm.
Easy access to interior through an opening.
Funnel with two slopes that facilitate the feed flow.
Complements:
Flexible tube. Transparent option.
Connection to flexible tube by thread.
Technical Specification >
STOP SENSORS//
MEMBRANE SENSOR:
| Material |
|---|
|
ABS plastic |
Design and Technical specification
Sensor with or without box with cable 3×0.5mm of 300mm.
Recommended controling of materials that flows easily and do not compact.
Fixing using screws, to the control unit or hopper.
Technical Specification >
MININIVEL MEMBRANE SENSOR:
| Material |
|---|
|
ABS plastic |
Design and Technical specification
To detect the minimum level in hoppers and silos.
Fijación mediante tornillos.
Recommended for powdery and granular products with easy flow.
Technical Specification >
SY-SM2 MEMBRANE SENSOR:
| Material |
|---|
|
Plastic DENISTAT Y 30G 04 |
Design and Technical specification
To detect the minimum level in hoppers and silos.
Fixation by screws.
Technical Specification >
CAPACITIVE SENSOR//
Design and Technical specification
Electronically controlled switch.
Fully sealed to prevent moisture and dust from damaging its components.
Internal microprocessor allows a delay of 1 second to 2 hours avoiding continuous running of the motor.
Technical Specification >
GEARED MOTORS//
Design and Technical specification
Power: 0.5, 1 and 1.5 CV.
Single-phase (110-220 V) y three-phase (230/400 V).
Frequencies 50 and 60 Hz.
Technical Specification >
CONTROL PANEL//
Design and Technical specification
Power: 0.5, 1 and 1.5 CV.
Single-phase and Three-phase.
With thermal relay.
3-position selector : stop, automatic and manual.
Technical Specification >
OUTLET DROPS//
| Material |
|---|
|
Polypropylene |
Design and Technical specification
Easy to to install. Different mounting option.
Individual opening and closing.
Adjustable and with telescopic extension.
Models:
Ø 55, 60, Ø 75, 90 and 125 mm
Drop tube Ø 63 or Ø 70 and 110 mm.
New transparent register.
Technical Specification >
INITIAL AND INTERMEDIATE PROLONGATION HOPPER//
| Material | |
|---|---|
|
Steel |
Galvanization S280GD EN 10346:2015 |
|
Galvanisation |
Z600 according to UNE-EN 10346:2015 |
Design and Technical specification
Diameters 55, 75, 90 and 125 mm.
Galvanized Z600.
Supplements to increase the capacity
Technical Specification >
DISPENSER//
| Material |
|---|
|
Polypropylene |
Design and Technical specification
Capacity 6L.
Transparent for tube of Ø 60 and Ø70mm.
Technical Specification >
